What are the proper levels for my pool chemicals?
pH - 7.4 to 7.8
Alkalinity - 80ppm to 160ppm
Chlorine - 1.5 to 3.0 depending on sunlight/usage/foliage
Calcium - 275ppm to 350ppm
How often should you replace your liner?
Every 5 to 7 years per the Manufacturer's recommendation
How often should you backwash?
Once a week or you may go up to 2 weeks as long as pressure does not get too high
How often should I check my chemicals?
pH, chlorine, and alkalinity - once a week
Calcium - every three months
What causes the Polaris to not move around the pool?
Try the quick disconnect on the side of the pool. The screen may be filled with debris or
contact us to have a certified service technician to diagnose the problem for you.
What does it mean when I am getting sand back into the pool?
The sand filter may not have been properly backwashed and rinsed or a lateral inside the filter
is broken. Contact us to have a service technician diagnose the problem.
What is the best type of filer for a swimming pool?
D.E is most efficient/2nd Cartridge/3rd is a sand filter
However, sand filter is the easist
My motor is making a loud squealing noise, what is the problem?
In most cases, the bearings may be bad and you will need to replace the motor.
How often should I run my pump?
Most pools take 6-8 hours to turn the pool water over completely. The water should be turned
over at least twice in a twenty-four hour period.
